Stentor III Reference class sub-bass system designed for use with very high quality stereo and multi-channel audio systems in larger rooms.
- True 300W (continuous) discrete, direct-coupled MOSFET amplifier
- Downward-firing long-throw 250mm (10") very heavy duty "Volt" driver, die-cast chassis
- Refined ABC® variable crossover adjustment in 24 musically correct semi-tone increments between 24Hz-106Hz.
- Acoustic Resistive Matrix (ARM) loading for smoother bass response
- Four position mode selector: line/LFE (0 degrees phase and 180 degrees phase)
- Audiophile grade toroidal transformer
- Gas-tight Neutrik high level connection for long-term consistency of sound quality
- High quality, panel-mounted twin phono inputs at 0dB and +12dB (low level)
- High and low level balanced inputs (Neutrik/XLR)
- Totally discrete input circuitry for high and low level inputs
- Separate volume controls for high and low-level adjustment
- Simultaneous connection of high and low level sources
- Set-Safe® audibly transparent driver protection
- Balanced-bridge power supply
- 8x ultra-rugged output devices
- Double thickness, double-sided glass-fibre board with plated-through holes
- IEC power input socket - no captive leads for installation flexibility
- Hand-built in Great Britain, three year worldwide warranty
Specifications
System Type |
ARM loaded cabinet with ABC® semi-tone variable bass filter. 70 litre. |
|
Lower Frequency response |
In room -6dB: 11Hz |
|
Amplifier Input impedance |
High level 100 kohm |
|
Gain Control Range |
Low level 10 kohm
80dB |
|
Drive unit impedance |
8 ohm |
|
Mains input voltage |
115 V 50/60 Hz or 230 V 50/60 Hz, subject to country |
|
Dimensions WxHxD mm (inches)
incl. feet and rear panel controls |
650x580x450 (25.61 x 22.85 x17.73) |
|
Weight Kg (lbs) |
55 (121.25) |
|
Finishes |
|
|
|
black oak |
light oak |
rosenut |
|
|
Studio III Reference class sub-bass system designed for use with the very finest stereo and multi-channel audio systems in larger rooms.
- True 500W (continuous) discrete, direct-coupled MOSFET amplifier
- 2x downward-firing long-throw 250mm (10") very heavy duty "Volt" drivers , die-cast chassis
- Refined ABC® variable crossover adjustment in 24 musically correct semi-tone increments between 24Hz-106Hz.
- Acoustic Resistive Matrix (ARM) loading for smoother bass response
- Four position mode selector: line/LFE (0 degrees phase and 180 degrees phase)
- Audiophile grade toroidal transformer
- Gas-tight Neutrik high level connection for long-term consistency of sound quality
- High quality, panel-mounted twin phono inputs at 0dB and +12dB (low level)
- High and low level balanced inputs (Neutrik/XLR)
- Totally discrete input circuitry for high and low level inputs
- Separate volume controls for high and low-level adjustment
- Simultaneous connection of high and low level sources
- Set-Safe® audibly transparent driver protection
- Balanced-bridge power supply
- 8x ultra-rugged output devices
- Double thickness, double-sided glass-fibre board with plated-through holes
- IEC power input socket - no captive leads for installation flexibility
- Hand-built in Great Britain, three year worldwide warranty
Specifications
System Type |
ARM loaded cabinet with ABC® semi-tone variable bass filter. 110 litre. |
|
Lower Frequency Response |
(in room -6dB): 9Hz |
|
Amplifier Input impedance |
High level 100 kohm |
|
Gain Control Range |
Low level 10 kohm
80dB |
|
Drive unit impedance |
8 ohm |
|
Mains input voltage |
115 V 50/60 Hz or 230 V 50/60 Hz, subject to country |
|
Dimensions WxHxD mm (inches)
incl. feet and rear panel controls |
685x617x567 (26.99 x 24.31 x 22.34) |
|
Weight Kg (lbs) |
93 (205.03) |
|
Finishes |
|
|
|
black oak |
light oak |
rosenut |
|
|