PL100 The PL100 is a truly compact, wideband speaker capable of expressing the entire micro-dynamic texture of every performance. A rigid cabinet construction, proprietary bracing techniques and advanced damping technologies combine to provide the optimum environment for its wonderfully accurate and detailed C-CAM ribbon tweeter and its lightening-fast, precision-engineered RDT bass driver. The PL100 will draw a rich, natural radiance from the most demanding of music and film scores and reproduce the power and scale of dramatic passages with a breathtaking fidelity.
Specifications
Frequency Response: |
42 Hz - 100 KHz |
Sensitivity (1W@1M): |
88 dB |
Nominal Impedance: |
4 Ohms |
Maximum S.P.L
(Per pair in room): |
112.6 dBA |
Power Handling (RMS): |
120 W |
Recommended Amplifier Requirements (RMS): |
50 - 120 W |
Bass Alignment: |
Ported |
|
HiVe II Technology |
Mid / H.F Crossover Frequency: |
2800 Hz |
Bass Low Pass Crossover Frequency: |
N/A |
Drive Unit Compliment: |
1 x 6.5" RDT Bass/mid-range driver
1 x C-CAM high frequency ribbon transducer |
External Dimensions -
Excluding Stand (H x W x D): |
370 x 225 x 285 mm
(14 9/16 x 8 7/8 x 11 1/4 inch) |
Stand External Dimensions -
(H x W x D): |
615 x 340 x 365 mm
(24 3/16 x 13 3/8 x 14 3/8 inch) |
Weight (each) Excluding stands: |
13 Kg (28.6lbs) |
|
PL200 The latest addition to Monitor Audio's flagship Platinum range is a compact version of the universally acclaimed PL300 loudspeaker, designed for an even broader range of environments. In a skilful re-sizing of the PL300 (the PL200 occupies approximately 1/3 the volume of the PL300), Monitor Audio's engineers have taken great care to preserve all the sonic virtues and design excellence of the larger speaker. By utilising a re-scaled 6.5" version of the Platinum 8" bass driver and by re-configuring the Platinum mid-range Tapered Line Enclosure (TLE) to align co-axially with the PL200's HiVe®II bass reflex port, they have endowed the smaller PL200 with the spiritual essence of its universally admired range-mate.
Specifications
Frequency Response: |
35 Hz - 100 KHz |
Sensitivity (1W@1M): |
90 dB |
Nominal Impedance: |
4 Ohms |
Maximum S.P.L
(Per pair in room): |
117.8 dBA |
Power Handling (RMS): |
250 W |
Recommended Amplifier Requirements (RMS): |
100 - 250 W |
Bass Alignment: |
Rear Ported HiVe®II technology
Sealed Mid-range TLE® |
Mid / H.F Crossover Frequency: |
3600 Hz |
Bass Low Pass Crossover Frequency: |
600 Hz |
Drive Unit Complement: |
2 x 6.5" long-throw RDT® bass drivers
1 x 4" RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer |
External Dimensions -
Including Fixed Plinth (H x W x D): |
998 x 360 x 375 mm
(39 5/16 x 14 3/16 x 14 3/4 inches) |
Weight (each) Including Plinth: |
33Kg (72.7 lbs) |
|
PL300 Standing at nearly 1.2m tall, the PL300 is a majestic three-way floor-standing loudspeaker possessing the ability to generate the power and scale required to fill a larger room with awe-inspiring sound. Jaw-dropping dynamics, combined with supreme agility give the PL300 the power to paint the widest and most luminous of sonic pictures. It is a true wide-bandwidth speaker system, reproducing clean, natural frequencies ranging from 28Hz to 100kHz. Extremely accurate drivers, very low distortion networks and a sublimely inert cabinet structure combine to create a loudspeaker of immense sonic integrity: neutral, lifelike and totally refined.
Specifications
Frequency Response: |
28 Hz - 100 KHz |
Sensitivity (1W@1M): |
90 dB |
Nominal Impedance: |
4 Ohms |
Maximum S.P.L
(Per pair in room): |
118.6 dBA |
Power Handling (RMS): |
300 W |
Recommended Amplifier Requirements (RMS): |
100 - 300 W |
Bass Alignment: |
Twin Ported HiVe II Technology |
|
Sealed Mid-range TLE |
Mid / H.F Crossover Frequency: |
4000 Hz |
Bass Low Pass Crossover Frequency: |
550 Hz |
Driver Unit Complement: |
2 x 8" long throw RDT bass drivers
1 x 4" RDT mid-range driver
1 x C-CAM high frequency ribbon transducer |
External Dimensions -
Including Fixed Plinth & Feet
(H x W x D): |
1113 x 410 x 470 mm
(43 13/16 x 16 1/8 x 18 1/2) |
Weight (each) including Plinth: |
43.8Kg (96.4lbs) |
|
PLW15 Underpinning the drama and scintillating musical vitality of a Platinum multichannel speaker system is the PLW-15, a range matching sub-bass engine endowed with all the quality, virtuosity and excellence that defines the marque. Capable of releasing the deepest frequencies recorded on disc, the PLW-15 will drive performances of music and film with an utterly breathtaking authority. Its 15" (381mm) long-throw C-CAM driver is triple suspended in a rigid die-cast alloy chassis. A massive double-stack magnet motor system with a 4" (101.6mm) voice coil provides the ultimate linearity and control required to reproduce the clean seismic 16Hz tones that you feel more than you hear.
Specifications
Amplifier Output: |
1000 watts (RMS) 2000 watts (Peak) |
Frequency Response: |
16Hz to 40/160Hz variable |
Crossover (Low Pass): |
40Hz - 160Hz Variable slope characteristic from
12 - 36dB/Octave |
Sub-Sonic Filter (High Pass): |
16Hz - 31Hz |
EQ: |
4 x Presets 1 x User Setting |
Equalisation: |
Graphic 9 band Equaliser ±6dB in 0.5dB steps |
Volume Level: |
-80 - 0dB (1dB increments from 0 to -30dB & 2dB
increments from -31 to -80dB) |
Auto Sensing Input Requirements: |
Line Level>5mV (RMS) Variable delay time
5, 10, 15, 20, 25 & 30 minutes |
Variable Phase Control: |
0. 45. 90, 135, 180, 225, 270 & 315º |
Internal Memory: |
3 Independent memory locations |
Cabinet Specification: |
Sealed Cabinet with 25mm thick M.D.F
construction with critical internal bracing |
Amplifier Classification: |
Class-D amplifier with DSP control |
Driver Complement: |
1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil |
External Dimensions -
Excluding Plinth: |
Width: 485mm (19 inches)
Height: 455mm (18 inches)
Depth: 475mm (18 3/4 inches) |
Weight: |
50 Kg (110lbs) |
Mains input Voltage: |
100 - 240 Vac 50/60Hz (Factory Set) |
Trigger Input: |
3.5mm Jack input, +12Vdc = On State |
|
PLC150 The Platinum PLC150 centre-channel speaker extends the choice of Platinum system building options for a wider range of room sizes. This condensed version of the PLC350 shares the radical materials, processes and production techniques of its Platinum series counterparts and so is supremely esoteric in nature, setting new standards of aesthetic quality and performance within any compact high-quality multi-channel system. Even so, its use of two 6.5" RDT® bass/midrange drivers astride a C-CAM® high frequency ribbon transducer makes it a perfect partner for the neutral tonal balance and accurate, dynamic sound of the PL100 and PL200.
Specifications
Frequency Response: |
45Hz- 100kHz |
Sensitivity (1W@1M): |
89 dB |
Nominal Impedance: |
4 Ohms |
Maximum S.P.L
(Per pair in room): |
112.8 dBA |
Power Handling (RMS): |
200 W |
Recommended Amplifier Requirements (RMS): |
60 - 200 W |
Bass Alignment: |
Rear Ported HiVe II Technology |
Mid / H.F Crossover Frequency: |
1800 Hz |
Bass Low Pass Crossover Frequency: |
250 Hz |
Drive Unit Complement: |
2 x 6 1/2" RDT bass/mid-range driver
1 x C-CAM high frequency ribbon transducer |
External Dimensions -
Excluding Stand: |
Width: 583mm (22 15/16 inches)
Height: 225mm (8 7/8 inches)
Depth: 291.2mm (11 7/16 inches) |
Stand Dimensions: |
Width: 610mm (24 inches)
Height: 335mm (13 13/16 inches)
Depth 463mm (18 1/4 inches) |
Weight: |
19 Kg (41.8lbs) |
|
PLC350 Given that at least sixty per cent of the information generated by a home theatre system is reproduced by the centre channel speaker, the necessity of having as accomplished a design as the PLC350 in the role cannot be exaggerated. It's a substantial three-way, four driver system with the same driver complement as the PL300. Having a purely neutral tonal balance, vanishingly low distortion and cabinet colouration, and the most advanced drivers in its class, the PLC350 is able to illuminate frequencies from 32Hz to 100 kHz - arguably the widest bandwidth of any centre speaker available. Aesthetically and acoustically matched with the PL300, the PLC350 will deliver a seamless transition of audio within the front soundstage of a Platinum multi-channel system for a truly immersive, dynamic and enriching music or film sound experience.
Specifications
Frequency Response: |
32 Hz - 100 KHz |
Sensitivity (1W@1M): |
90 dB |
Nominal Impedance: |
4 Ohms |
Maximum S.P.L
(Per pair in room): |
117.8 dBA |
Power Handling (RMS): |
250 W |
Recommended Amplifier Requirements (RMS): |
100 - 250 W |
Bass Alignment: |
Twin Ported HiVe II Technology |
|
Sealed Mid-range TLE |
Mid / H.F Crossover Frequency: |
4000 Hz |
Bass Low Pass Crossover Frequency: |
550 |
Drive Unit Complement: |
2 x 8 long-throw RDT bass drivers
1 x 4" RDT Mid-range driver
1 x C-CAM high frequency ribbon transducer |
External Dimensions -
Excluding Stand (H x W x D): |
288 x 800 x 368 mm
(11 5/16 x 31 1/2 x 14 1/2 inch) |
Stand External Dimensions -
Including Plinth Feet
(H x W x D): |
335 x 610 x 463 mm
(13 13/16 x 24 x 18 1/4 inch) |
Weight: |
33.5 Kg (73.8lbs) |
|
PL InWall The PL - InWall is a no-compromise three-way in-wall design at the cutting edge of our technology. It incorporates twin 6.5" RDT® bass drivers, a 4" RDT mid-range driver and the universally admired Platinum ribbon tweeter. With the same driver configuration and construction as our award-winning PL200 floor-standing model, the PL-InWall is a true wide-bandwidth in-wall speaker system with an astonishing 52Hz-100KHz range. The beauty of the PL-InWall is that it can deliver the best possible audio performance while remaining completely discreet. It's designed to fit vertically or horizontally within any stud wall type construction to become an intrinsic part of the room fabric. By fashioning an 'invisible' speaker with Platinum's naturally clear, dynamic and detailed sound, our engineers have performed a modest miracle. With the advent of the PL-InWall, the look and the luxury of a high-performance multi-speaker surround system installed seamlessly in-wall is now a reality.
Specifications
Frequency Response: |
52 Hz - 100 kHz |
Sensitivity (1W@1M): |
90 dB |
Nominal Impedance: |
4 ohms |
Maximum S.P.L (each): |
117.8 dBA |
Power Handling (RMS): |
200 W |
Recommended Amplifier Requirements (RMS): |
100 - 200 W |
Bass Alignment: |
Sealed Cabinet |
System Design |
3-way |
Mid / H.F Crossover Frequency: |
2400 Hz |
Bass Low Pass Crossover Frequency: |
380 Hz |
Drive Unit Compliment: |
2 x 6.5" long-throw RDT® bass drivers
1 x 4" RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer |
External Dimensions - with Grille (H x W x D): |
1205 x 330 x 116 mm
(47 7/16 x 13 x 4 9/16 inch) |
External Dimensions - excl. Grille (H x W x D): |
1205 x 330 x 102 mm
(47 7/16 x 13 x 4 inch) |
Cut Out Depth: |
97.5mm (3 13/16 inch) |
Weight (each) |
25 Kg (55lbs) |
|