IWSub Reference The IWSub Reference is a completely self enclosed in-wall subwoofer for use in whole house distributed music or “stealth" home theater installations. It's a deep bass powerhouse that will disappear in your room. It has a non-resonant sealed medite (a dense wood product) enclosure and a paintable bezel and grille. Inside the completely self-enclosed in-wall sub is the technical brainpower derived from Definitive's award winning SuperCube free-standing subwoofers. It includes a special shallow-depth, long excursion active 13" driver pressure-coupled to a 13" Ultra Low Bass radiator for a total bass radiating surface area of over 265 square inches-more than an 18 inch woofer but with greater speed and control. Combined, these features result in tight musical excellence.
Specifications
Outer Flange Dimensions | (Metric) :15-1/2" W x 26-3/16" H | 39.4 x 66.5 cm
Cut Out Dimensions | (Metric) :14-3/8" W x 25-1/8" H | 36.5 x 63.8 cm
Depth from Flange | Metric :4" | 10.2 cm
Driver Complement :One 13" Long-Excursion Woofer coupled to a 13" infrasonic Radiator
Frequency Response :14 Hz-200 Hz
Impedance :4 ohms
Required Amplifier :SubAmp 600 (available separately)
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template; Paintable removable all metal grill
Packaging :One to a carton
Weight | (Metric) :45 lbs | 20.4 kg
Warranty :5 Years
|
UIW RLS II The Reference Line Source II (RLS II) is an enclosed full range loudspeaker engineered for flush mount in-wall installation. It features a non-resonant sealed medite (a dense wood product) enclosure to deliver the tight, detailed bass and uncolored midrange of audiophile free-standing speakers in every installation. The performance of open back built-in speakers will vary depending on the nature of the wall/ceiling cavity behind the speaker. But Definitive Reference integrated enclosure speakers sound superb every time. Rotating dogleg clamps make the RLS II easy to install in either new or existing construction and provide secure, non-resonant mounting for ultimate audiophile performance free of vibrations and buzzes.
Specifications
Outer Flange Dimensions | Metric :8-1/8" W x 29-3/4" H | 20.6 x 75.6 cm
Cut Out Dimensions | Metric :7" W x 28-1/2" H | 17.8 x 72.4 cm
Depth from Flange | Metric :3-13/16" | 9.7 cm
Driver Complement :One 1" pure aluminum dome tweeters; Two 6-1/2" cast-basket bass/midrange drivers pressure coupled to two 6-1/2" bass radiators
Frequency Response :22 Hz-30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :92 dB
Recommended Associated Amplifier Power :10-350 watts
A/V Receiver Crossover Setting :40 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Weight | Metric :17 lbs | 7.7 kg
Packaging :One to a carton
Warranty :5 Years
|
UIW Reference RCS II The Reference Ceiling Speaker II (RCS II) is intended for use as an in-ceiling front main left, center or right channel speaker in custom installed home theater systems of the highest quality. In addition, it can be used as a superb left or right speaker in a high quality stereo music system.
Specifications
Outer Flange Dimensions | Metric :15-1/2" W x 15-1/2" H | 39.4 x 39.4 cm
Cut Out Dimensions | Metric :14-3/8" W x 14-3/8" H | 36.5 x .36.5 cm
Depth from Flange | Metric :5-7/8" | 14.9 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 5-1/4" cast-basket bass/midrange drivers pressure coupled to two 6-1/2" bass radiators
Frequency Response :22 Hz-30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :
Recommended Associated Amplifier Power :10-250 watts
A/V Receiver Crossover Setting :40 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Weight | Metric :22 lbs | 10 kg
Warranty :5 Years
|
SubAmp 600 The SubAmp 600 is a high powered amplifier and electronic crossover specifically engineered for use with the Definitive IWSub 10/10 and IWSub References in-wall subwoofers. It features two discrete high power amplifiers with simple connections in one convenient housing that fits easily on a shelf or in an audio equipment rack. It provides optimal power for effortlessly driving one or two IWSubs, in the same room or in different zones.
Specifications
Power Output One Channel Driven :275 watts
Dimensions (Without Brackets, Including Feet) :17-1/16" W x 9-5/8" D x 3-11/16" H (43.34 cm W x 24.45 cm D x 9.37 cm H)
Weight | Metric :28 lbs | 12.70 kg
Dimensions (With Brackets, Feet Removed) :19-1/16" W x 9-5/8" D x 3-7/16" H (41.42 cm W x 24.45 cm D x 8.73 cm H)
Finish :Available in both silver and black
Power Output Two Channels Driven :230 watts each
|
UIW RLS III The Reference Line Source III (RLS III) is an enclosed full range loudspeaker engineered for flush mount in-wall installation. It features a non-resonant sealed medite (a dense wood product) enclosure to deliver the tight, detailed bass and uncolored midrange of audiophile free-standing speakers in every installation. The performance of open back built-in speakers will vary depending on the nature of the wall/ceiling cavity behind the speaker. But Definitive Reference speakers with integrated enclosures sound superb every time. Rotating dogleg clamps make the RLS III easy to install in either new or existing construction and provide secure, non-resonant mounting for ultimate audiophile performance free of vibrations and buzzes.
Specifications
Outer Flange Dimensions | Metric :7" W x 25" H | 17.8 x 63.5 cm
Cut Out Dimensions | Metric :5-7/8" W x 23-3/4" H | 14.9 x 60.3 cm
Depth from Flange | Metric :3-13/16" | 9.7 cm
Driver Complement :One 1" pure aluminum dome tweeters; Two 5-1/4" cast-basket bass/midrange drivers pressure coupled to two 5-1/4" bass radiators
Frequency Response :24 Hz-30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :92 dB
Recommended Associated Amplifier Power :10-325 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Warranty :5 Years
Weight | (Metric) :15 lbs | 6.8 kg
|
UIW RSS II Definitive Reference Architectural Speakers are perfect for bringing spectacular-sounding, high-performance "invisible" home theater systems into every room in your house. The Reference Surround Speaker II (RSS II) is intended for use as an in-ceiling or in-wall rear or side surround speaker in custom installed home theater systems of the highest quality.
Specifications
Outer Flange Dimensions | Metric :11" x 12-3/4" | 27.9 x 32.4cm
Cut Out Dimensions | Metric :9-7/8" x 11-5/8" | 25.1 x 29.5 cm
Depth from Flange | Metric :3-7/8" | 9.8 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 4-1/2" bass radiators
Frequency Response :26 Hz-30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10-200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Warranty :5 Years
Weight | Metric :13 lbs | 5.9 kg
|
UIW RCS III The Reference Ceiling Speaker III (RCS III) is intended for use as an in-ceiling front main left, center or right channel speaker, as well as a rear or side surround speaker in custom installed home theater systems of the highest quality. In addition, it can be used as a superb left or right speaker in a high quality stereo music system.
Specifications
Outer Flange Dimensions | Metric :11-1/2" W x 11-1/2" H | 29.2 x 29.2 cm
Cut Out Dimensions | Metric :10-3/8" W x 10-3/8" H | 26.4 x 26.4 cm
Depth from Flange | Metric :5-7/8" | 14.9 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 5-1/4" bass radiators
Frequency Response :30 Hz-30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :
Recommended Associated Amplifier Power :10-250 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Mounting :Two mounting dogs per side; 2 wood screws per side. Dogs require an additional 3/4" internal clearance
Packaging :One to a carton
Warranty :5 Years
Weight | Metric :lbs | kg
|
UIW RSS III Definitive Reference Architectural Speakers are perfect for bringing spectacular-sounding, high-performance "invisible" home theater systems into every room in your house. The Reference Surround Speaker III (RSS III) is intended for use as an in-ceiling or in-wall rear or side surround speaker in custom installed home theater systems of the highest quality.
Specifications
Outer Flange Dimensions | Metric :9-7/16" x 11" | 24.0 x 27.9 cm
Cut Out Dimensions | Metric :8-5/16" x 9-7/8" | 21.1 x 25.1 cm
Depth from Flange | Metric :3-7/8" | 9.8 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 3-1/2" cast-basket bass/midrange drivers pressure coupled to two 3-1/2" bass radiators
Frequency Response :40 Hz-30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10-200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Warranty :5 Years
Weight | Metric :12 lbs | 5.4 kg
|